Non Skid Grit - Anti Slip Floor Additive 1.5 lb Can (500 sq/ft)
Please select your grit size from the drop-down menu above.
Smaller numbers = coarser, larger grit.
If you are unsure, the standard size (pictured) is 36.
Non-skid Application: Surfaces coated with high-gloss epoxy may become slippery when wet. For additional slip resistance in areas of pedestrian traffic, use the Non-Skid Additive. While applying your color chips, use the Original Color Chips Easy Sprinkle Can to sprinkle grit onto basecoat.. Then once dry, apply clearcoat over chips/grit to create bumps in the texture. Be sure not to apply non-skid in too high-concentration. Sprinkle 1 can (1.5 lbs.) of non-skid per 500 square feet.
The Original Color Chips Waterborne Clearcoat Epoxy is a thin-mil coating, so the nonskid creates bumps in the coating but doesn't sacrifice the gloss!.
For a more aggressive non-skid application, sprinkle the non-skid in the clearcoat by rolling out area, sprinkling the desired coverage then back-rolling over area to seal the non-skid into clearcoat.